MountWatcher is a Mac OSX application used to organize, automate and monitor the mounting of Windows (SMB) and Apple (AFP) volumes/shares/disks. Laptops can use MountWatcher to automatically mount volumes at work and at home. MountWatcher can also be used to wake computers that are sleeping on an ethernet LAN.
If you need to mount disks from elsewhere on your network then MountWatcher can make your life easier. MountWatcher does just what its says, it holds a list of volumes (hard drives on other computers) with the necessary username and password and will automatically mount them whenever you want. Better still it watches and makes sure that they stay mounted if the network status changes.
MountWatcher can keep an eye on a mount and if a server goes down (and the mount disappears) MountWatcher will remount the share when the server comes back online. However, for this to happen, you need to check the “Monitor this mount and keep it mounted” switch.
MountWatcher can mount Windows shares when the username is local to the server doing the sharing but MountWatcher does not support DOMAIN Server authentication at this time. We are currently working on Active Directory and Domain Server authentication. Again, this doesn’t affect regular non-DOMAIN Windows mounts.
Mac OS X Technologies
✔ MountWatcher uses Bonjour to make mounting a local volume easy.
✔ MountWatcher can be setup to use one global user and password for all volumes.
✔ MountWatcher can wake up computers on a LAN.
Step 1. When you first start MountWatcher, no records will be present in the Identity Table. Click the + button at the bottom to Add a new record.
Step 2. The Mount Identity record is created is fake sample mount data. You need to modify the fake sample data with the data needed to successfully mount the volume. Start by changing the Mont Identity to a unique text string that will allow you to easily know what volume is being mounted by this record.
Step 3. The text field named (File Server Hostname or IP Address) is very important to get correct. You really have three options for entering data here:
Option 1. You can enter the IP address of the fileserver that holds the volume you are mounting. This is the safest and most accurate way for MountWatcher to always work. If you know the IP address of the fileserver, it is preferred that you enter it. The only reason why you would not want to enter an IP address is if you are mounting a volume from a computer that is getting an address dynamically (via DHCP) and the address is always changing. Then you must use Option 2 or Option 3 below.
Option 2. As mentioned in Option 1, it is preferred that you simply enter the IP address of the fileserver; however, sometimes the fileserver IP address changes because the server is really just a laptop or desktop that obtains an IP address automatically. In this case, you can try to use the Zero Configuration option called Bonjour. Above the Identity Table is a button named Bonjour to see if MountWatcher can automatically discover the server using Apples version of zero config, named Bonjour. Click on the Bonjour button and a panel slides out listing all servers found on the network via Bonjour. If you see the server you want to use, just double-click that row and it will auto-populate the fileserver text field with the correct information. As long as the fileserver does not change names, you should not need to modify this field again. If you are wondering how a fileserver sets this hostname, on an OSX computer, the fileserver bonjour name is set in Apple->SystemPreferences-> Sharing configuration panel. Set the name in the Computer Name field on the server.
Option 3. If your place of business uses their own DNS server and they have properly configured a hostname for this fileserver inside of their DNS server, then you may enter the DNS hostname of the server. The only requirement is that MountWatcher will attempt to convert this hostname into an IP address and if it fails, then MountWatcher will display an error saying the hostname is not resolvable. Which means the text string you entered could not be turned into an IP address.
Step 4. Enter the name of the volume that the server is making available to be mounted (this is called Sharing) and that you are trying to mount. If you are unsure what this is, you should select the Finder and then enter Command+K and it will open a window that lets you enter data to mount a server. If the server is a Mac, enter afp://18.104.22.168 (where 22.214.171.124 is the IP address of the server). If the server is a Windows server, enter smb://126.96.36.199. You will then be prompted for your username and password and the server will authenticate you. You will then be presented with a window that displays all the volumes the server is sharing. It is one of those volume names being displayed that you should enter in the Volume or Share Name field of MountWatcher. Essentially, MountWatcher lets you automate the mounting of volumes. The volumes are just like the volumes you saw in the Command+K output but can only mount a volume if the server is Sharing it (or making it available to be mounted). If you do not know the volume or share name and you cannot determine it from Command+K, you need to contact the person that manages the fileserver (or computer) and ask them.
Step 5. When MountWatcher mounts a volume on your behalf it must provide the fileserver with username and password to authenticate you to the server and if the username and password is valid, then you will be granted access to the volume. Normally a user of MountWatcher will have the same username and password for all servers; therefore, on the bottom right there is a Global Username and Global Password field. Enter your username and password there. If you ever need to use a different username and password (other than the Global) for a certain server, then you would select the checkbox for Use Separate Username/Password for that Mount/Record. This tells MountWatcher not to use the Global username/password for this server but instead use the username/password you have specified in the Separate Username/Password text fields.
Step 6. If it is your desire for MountWatcher to always monitor a particular volume and if MountWatcher detects the volume is not mounted, then MountWatcher will try to re-mount the volume. MountWatcher will only try to re-mount the volume if it detects that it can reach the fileserver across the network. To accomplish this you would need to check the check-box named:
Automate: If the volume is found unmounted, auto remount if possible
For support click here.
After checking out MountWatcher. Please purchase the app to support it’s evolution. Go to our store and we will send you an email with a license key.
We like to hear from you. Please send us your ideas, suggestions and bugs to fix. Thanks for supporting MountWatcher.
The crew at Plum Amazing